Hyundai Sonata: Exterior Care / Bright-metal maintenance
- To remove road tar and insects, use a tar remover, not a scraper or other sharp object.
- To protect the surfaces of brightmetal parts from corrosion, apply a coating of wax or chrome preservative and rub to a high luster.
- During winter weather or in coastal areas, cover the bright metal parts with a heavier coating of wax or preservative. If necessary, coat the parts with non-corrosive petroleum jelly or other protective compound.
Finish damage repair
Deep scratches or stone chips in the painted surface must be repaired promptly.
Exposed metal will quickly rust and may develop into a major repair expense.
NOTICE
If your vehicle is damaged and requ ...
Underbody maintenance
Corrosive materials used for ice and snow removal and dust control may collect
on the underbody. If these materials are not removed, accelerated rusting can occur
on underbody parts such as the fuel ...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Side Body Body Repair
Side Body A
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]
Side Body B
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]
Fender apron tooling hole (O7)Fender apron panel tooling hol ...
Hyundai Sonata LF 2014-2019 Service Manual: Power Window Switch Repair procedures
Inspection
Diagnosis with GDS
1.
The body electrocal system can be quickly diagnosed failed parts with vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following information.
(1)
Self diagnosis : Checking the failure code (DTC) and display
(2)
Current data : Chec ...
