Hyundai Sonata: Seat Belts / Care of Seat Belts
Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse.
Periodic inspection
All seat belts should be inspected periodically for wear or damage of any kind. Any damaged parts should be replaced as soon as possible by an authorized HYUNDAI dealer.
Keep belts clean and dry
Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents or abrasives should not be used because they may damage and weaken the fabric.
When to replace seat belts
The entire seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional questions concerning seat belt operation should be directed to an authorized HYUNDAI dealer.
Additional Seat Belt Safety Precautions
Seat belt use during pregnancy
The seat belt should always be used during pregnancy. The best way to protect
your unborn child is to protect yourself by always wearing the seat belt.
Pregnant women s ...
Child Restraint System (CRS)
Children Always in the Rear
WARNING
Always properly restrain children in the rear seats of the vehicle.
Children of all ages are safer when restrained in the rear seat. A child riding
in the front pa ...
Other information:
Hyundai Sonata LF 2014-2019 Owners Manual: Securing a child restraint seat with "Tether Anchor" system
First secure the child restraint with the LATCH lower anchors or the seat belt.
If the child restraint manufacturer recommends that the top tether strap be attached,
attach and tighten the top tether strap to the top tether strap anchor.
Child restraint hook holders are located on the package tra ...
Hyundai Sonata LF 2014-2019 Service Manual: Filler-Neck Assembly Repair procedures
Removal
1.
Turn the ignition seitch OFF and disconnect the battery negative (-) cable.
2.
Open the fuel filler door and then remove the filler-neck installation screw (A).
3.
Lift the vehicle.
4.
Remove the rear-LH wheel, tire, and the inner wheel house.
5.
Remove the rear sub ...
