Hyundai Sonata: Crash Pad / Crash Pad Garnish Assembly [RH] Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Garnish Assembly [RH] Repair procedures

Replacement

•	When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Using a screwdriver or remover, remove the crash pad side cover [RH] (A).

2.	After loosen the mounting screws, remove the crash pad passenger side garnish (A).

3.	After loosening the mounting screw, then remove the crash pad garnish assembly [RH] (A).

Install in the reverse order of removal.

•	Replace any damage clips.

Crash Pad Garnish Assembly [RH] Components and Components Location

Component Location 1. Crash pad garnish assembly [RH] ...

Crash Pad Lower Panel Components and Components Location

Component Location 1. Crash pad lower panel ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Components and Components Location
Components NoConnector AConnector BConnector C1Room lamp_outputGNDTrunk release switch_input2Heated handle power_IGN 2-Brake switch_input3heated handle_outputAuto light power_outputFog lamp switch_input4-Chassis CAN (Low)Head lamp high switch_input5Safety power window enable_outputC ...

Hyundai Sonata LF 2014-2019 Service Manual: Idler Repair procedures
Removal and Installation 1. Remove the drive belt. (Refer to Timing System - "Dreve Belt") 2. Remove the idler (A). Tightening torque : 42.2 ~ 53.9 N.m (4.3 ~ 5.5 kgf.m, 31.1 ~ 39.8 lb-ft) 3. Install in the reverse order of removal. ...