Hyundai Sonata: Crash Pad / Crash Pad Side Cover Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the crash pad side cover (A).
[LH]

[RH]

2.
Install in the reverse order of removal.
   
Replace the side cover when the self clip is damaged because the side cover is equipped the self clip.
Crash Pad Side Cover Components and Components Location
Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Crash Pad Under Cover Repair procedures
Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply p ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Assist Handle Components and Components Location
Component Location 1. Assist handle ...

Hyundai Sonata LF 2014-2019 Service Manual: Input shaft speed sensor 2 Repair procedures
Removal 1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechnical System - "Air cleaner") 2. Remove the battery and tray. (Refer to Engine Electrical System - "Battery") 3. Remove the clutch actuator. (Refer to Dual Clutch Control System - "Clutch Actuator") 4. ...

© 2018-2025 www.hsonatalf.org