| Replacement |
| 1. |
Loosen the rear door checker (B) mounting bolt. |
| 2. |
Detach the clips, then remove the rear door side weatherstrip (A).
|
| 3. |
Install in the reverse order of removal.
|
Rear Door Belt Outside Weatherstrip Repair proceduresReplacememt 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door belt outside weatherstrip (A)...
Description System Diagram Driver Door Module (DDM) Driver Door Module (DDM) is part of CAN configuration, communicating with BCM, SMK, SJB, PSM, and ADM via CAN while performing wired signal I/Os with safety power windows. Operate the buttons of DDM located on the inner side of the driver door to perform any functions related to power windows, electric mirror, and door lock/unlock...
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Accelerator Position Sensor (APS) is used to receive driver input...