Hyundai Sonata: Starting System / Starter Specifications

Specification
Item
Specification
Rated voltage
12 V, 0.9 kW
The number of pinion teeth
10
Performance
[No-load, 11.5 V]
Ampere
Max. 60 A
Speed
Min. 5,500 rpm

Starter Description and Operation
Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and th ...

Starter Components and Components Location
Components 1. Screw2. Front housing3. Stop ring4. Stopper5. Overrunning clutch6. Lever7. Lever plate8. Lever packing9. Magnet switch assembly10. Armature assembly11. Yoke assembly12. Brush (-)13. ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Specifications
Specifications Joint typeMax. permissible angleOuterInnerOuterInnerBJ#95LSJ#9545°21°BJ#104LSJ#10045°21° Tightening Torques ItemN.mkgf.mIb.ftFrontWheel nut88.3 ~ 107.99.0 ~ 11.065.1 ~ 79.6Drive shaft castle nut274.6 ~ 294.228.0 ~ 30.0202.5 ~ 217.1Strut assembly lower mounting bolt196.1 ...

Hyundai Sonata LF 2014-2019 Service Manual: Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ConditionOutput Voltage (V)Idle Approx. 1.21,500 rpm2.2 ~ 2.56,300 rpm Approx. 3.0 Removal 1. Turn the ignition switch OFF and dis ...

© 2018-2025 www.hsonatalf.org