Hyundai Sonata: Dual Clutch Transmission Assembly / Transmission Gear Oil General Information

General Information
1.
Check & Change intervals
Check & Replenishment
Change
Capacity
Oil specification
Normal Use
Severe Use
60000 km / 4 years
(40000 miles / 4 years)
No service required
120000 km
(80000 miles)
1.9 L (0.50 U.S gal., 2.00 U.S qt., 1.67 lmp qt.)
API Service GL-4, SAE 70W
• Recommended oil
-
SHELL: SPIRAX S6 GHME 70W DCTF
-
SK: HK DCTF 70W
-
GS CALTEX: GS DCTF HD 70W

   
Severe usage is defined as
Driving in dusty, rough roads
Driving in areas using salt or other corrosive materials or in very cold weather
Driving in sandy areas
Driving in mountainous areas
Towing a trailer
Driving for patrol car, taxi, commercial car or vehicle towing
Driving over 170 Km
Driving in veavy traffic area over 90°F (32°C)
Repeatedly driving short distance of less than 5 miles (8 km) in normal temperature or less than 10 miles (16 km) in freezing temperature
Driving in areas using salt or other corrosive materials or in very cold weather
Towing a trailer, or using a camper or roof rack
DCT (Dual Clutch Transmission) Repair procedures
Removal 1. Remove the air cleaner assembly and air duct. (Refer to Engine Mechnical System - "Air cleaner") 2. Remove the TCM. (Refe to Dual Clutch Transmission Control System - "TCM") 3 ...

Transmission Gear Oil Repair procedures
Inspection     • In principle, the transmission oil is maintenance-free, and no exchange is required. But it must be inspected and replenished every 4 years or 40,000 mile ...

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Repair procedures
Operation and Leakage Check Check all of the following items: ComponentProcedureBrake Booster (A)Check brake operation by applying the brakes during a test drive. If the brakes do not work properly, check the brake booster. Replace the brake booster as an assembly if it does not work properl ...

Hyundai Sonata LF 2014-2019 Service Manual: Rear Wheel Speed Sensor Repair procedures
Removal 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the wheel cap(A).     Be careful not to damage to the wheel cap(A) when removing the it. 3. Remove the front wheel and tire (A) from front hub. Tightening torque: 88.2 ~ 107.8 N.m (9. ...

© 2018-2024 www.hsonatalf.org