Hyundai Sonata LF: Engine Mechanical System / Engine And Transmission Assembly

Special Service Tools

Special Service Tools Tool (Number and name)IllustrationUseCrankshaft front oil seal installer(09455-21200)Installation of the front oil sealValve stem oil seal installer(09222-2B100)Installation of the valve stem oil sealValve spring compressor and holderA : (09222-3K000)B : (09222-3K100)Removal and installation of the intake or exhaust valveCrankshaft rear oil seal installerA : (09231-H1100)B : (09231-2B200)Installation of the crankshaft rear oil sealRing gear stoppper(09231-2B100) (A)(09231-3N100) (B)Removal and installation of crankshaft pulley bolt...

Engine Cover Repair procedures

R..

Other information:

Hyundai Sonata LF 2014-2019 Service Manual: Steering Angle Sensor Repair procedures

Adjustment Calibration (Setting up the zero angle) Steering Wheel Angle Sensor of a absolute angle type (CAN type) measures the angle under the standard of the zero angle set. Calibration must be performed as following cases. - Replacement of the Steering Wheel Angle Speed Sensor - Replacement or repair of the Steering column - Detection of DTC codes (C1260, C1261) - Replacement of the sensor cluster - Replacement of HECU Calibration procedure Perform wheel alignment and stand the steering wheel in a line within ±5°error...

Hyundai Sonata LF 2014-2019 Service Manual: Temperature Control Actuator Description and Operation

Description The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch...