Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the driver door trim.
(Refer to Body - "Front Door Trim") |
3. |
Remove the memory power seat switch connector (A). |
4. |
Remove the memory power seat switch (A) after loosening the mounting screws. |
Installation |
1. |
Install the memory power seat control switch (IMS). |
2. |
Install the door trim. |
3. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
Remove the memory power seat connector |
2. |
When each switch is pressed, check the electricity flow
between memory power seat switch connector and grounding, and if the
electricity does not match the specification, replace the switch. |
Hyundai Sonata LF 2014-2019 Service Manual: Heated Oxygen Sensor (HO2S) Specifications
Specification
HO2S [Bank 1/Sensor 1] (Linear type)
ItemSpecificationHeater Resistance (?)2.4 ~ 4.0 [20°C(68°F)]
ItemSpecificationHeater Resistance (?)Approx. 9.0 [20°C(68°F)]
HO2S [Bank 1/Sensor 2] (Binary type)
A/F Ratio (?)Output Voltage(V)RICH0.6 ~ 1.0LEAN0 ~ 0.4
ItemSpeci ...
Hyundai Sonata LF 2014-2019 Service Manual: Components and Components Location
Component Location
1. DDM (Driver Door Module)2. ADM (Assist Door Module)3. SJB (Smart Junction Block)4. Door lock knob5. Trunk lid actuator6. Door latch module7. Door lock/unlock switch8. RLDM (Rear Left Door Module)9. RRDM (Rear Right Door Module)
...