Hyundai Sonata: Body Side Molding / Roof Side Molding Repair procedures

Hyundai Sonata LF 2014-2019 Service Manual / Body (Interior and Exterior) / Body Side Molding / Roof Side Molding Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

Using a screwdriver or remover, remove the roof side molding (A).

•	Always replace the roof side molding to a new one.

Install in the reverse order of removal.

•	Replace any damaged clips.

Body Side Molding

...

Delta Garnish Repair procedures

Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around ...

Other information:

Hyundai Sonata LF 2014-2019 Owners Manual: Emission Control System
The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty information contained in the Owner’s Handbook & Warranty Information booklet in your vehicle. Your vehicle is equipped with an emission control system to meet all applicable emissio ...

Hyundai Sonata LF 2014-2019 Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1]. 4. Measure resistance between the HO2S terminals 3 and 4 [B1/S2]. 5. Check that the resistance is within the specification. Specifica ...