Hyundai Sonata: Smart Cruise Control Speed / Smart Cruise Control will be temporarily canceled when

Canceled manually

• Depressing the brake pedal.
• Pressing the CANCEL button located on the steering wheel.

The Smart Cruise Control turns off temporarily when the indicator on the LCD display turns off.

The CRUISE indicator is illuminated continuously.

Canceled automatically

• The driver's door is opened.
• The shift toggle switch is shifted to N (Neutral), R (Reverse) or P (Park).
• The EPB (Electronic Parking Brake) is applied.
• The vehicle speed is over 120 mph (190 km/h)
• The ESC (Electronic Stability Control), TCS (Traction Control System) or ABS is operating.
• The ESC is turned off.
• The AEB (Automatic Emergency Btaking) system is operating.
• The radar or the cover is dirty or blocked with foreign matter.
• The engine speed is over 7000 rpm.
• The SCC system has malfunctioned.
• When the vehicle is stopped for more than 5 minutes.
• The driver starts driving by pushing the toggle switch up (RES+) or down (SET-) or depressing the accelerator pedal, approximately 3 seconds after the vehicle is stopped by the Smart Cruise Control System with no other vehicle ahead.
• The driver starts driving by pushing the toggle switch up (RES+) or down (SET-) or depressing the accelerator pedal, after stopping the vehicle with a vehicle stopped far away in front.
• The accelerator pedal is continuously depressed for more than 5 minutes.
  Each of these actions will cancel the Smart Cruise Control operation. (The Set Speed and Vehicleto- Vehicle Distance on the LCD display will go off.)
  In a condition the Smart Cruise Control is canceled automatically, the Smart Cruise Control will not resume even though the RES+ or SET- toggle switch is pushed. Also, the EPB will be applied when the vehicle is stopped.

NOTICE

If the Smart Cruise Control is canceled by other than the reasons mentioned, have your vehicle checked by an authorized HYUNDAI dealer.

If the system is canceled, the warning chime will sound and a message will appear for a few seconds.

You must adjust the vehicle speed by depressing the accelerator or brake pedal according to the road condition ahead and driving condition.

Always check the road conditions. Do not rely on the warning chime.