When pressing the () switch (1), all vehicle doors will lock.
When pressing the () switch (2), all vehicle doors will unlock.
If the key is in the ignition switch and any door is opened, the doors will not lock even though the lock button (1) of the central door lock switch is pressed.
If the smart key is in the vehicle and any door is opened, the doors will not lock even though the lock button (1) of the central door lock switch is pressed.
WARNING
WARNING
Do not leave children or animals unattended in your vehicle. An enclosed vehicle can become extremely hot, causing death or serious injury to unattended children or animals who cannot escape the vehicle. Children might operate features of the vehicle that could injure them, or they could encounter other harm, possibly from someone gaining entry to the vehicle.
WARNING
Always secure your vehicle.
Leaving your vehicle unlocked increases the potential risk to you or others from someone hiding in your vehicle.
To secure your vehicle, while depressing the brake, move the shift lever to the P (Park) position, engage the parking brake, and place the ignition switch in the LOCK/OFF position, close all windows, lock all doors, and always take the key with you.
WARNING
If you stay in the vehicle for a long time while the weather is very hot or cold, there are risks of injuries or danger to life. Do not lock the vehicle from the outside when someone is in the vehicle.
CAUTION
Opening a door when something is approaching may cause damage or injury. Be careful when opening doors and watch for vehicles, motorcycles, bicycles or pedestrians approaching the vehicle in the path of the door.
Hyundai Sonata LF 2014-2019 Service Manual: Immobilizer Control Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the knee airbag module.
(Refer to Restraint - "Knee Airbag (KAB) Module")
4.
Disconnect the connector of the immobilizer unit and ...
Hyundai Sonata LF 2014-2019 Service Manual: Rear Seat Assembly Repair procedures
Replacement
[Rear seat cushion assembly]
1.
Remove the rear seat cushion assembly (A).
?Rear seat cushion separation method
1.
Remove the rear seat cushion by pulling upward.
2.
Remove the rear seat cushion by pulling upwards while pushing rearward.
2.
Disco ...