| Specification |
| Pressure [kPa (kg/cm? / psi)] | Resistance (k?) |
| 32.5 (0.33, 4.71) | 0.5 |
| 284 (2.90, 41.19) | 4.5 |
Boost Pressure Sensor (BPS) Description and OperationDescription The Boost Pressure Sensor (BPS) is installed on the intercooler assembly and measures the pressure of the compressed air in turbocharger...
Brake Booster Operating Test For simple checking of the brake booster operation, carry out the following tests. 1. Run the engine for one or two minutes, and then stop it. If the pedal depresses fully the first time but gradually becomes higher when depressed succeeding times, the booster is operating properly, if the pedal height remains unchanged, the booster is inoperative...
Removal 1. Remove the engine cover. 2. Disconnect the battery negative terminal. 3. Remove the air clean hose. (Refer to Intake and Exhaust System - "Ari Cleaner") 4. Disconnect the engine wiring connector and haness clamp and then remove the cylinder head protector and wiring from engine...