Hyundai Sonata: Dual Clutch System / Clutch Engagement Fork and Engagement Bearing Components and Components Location
| Components |
| 1. Clutch housing 2. Engagement bearing 2 (Even) 3. Egnagement bearing 1 (Odd) | 4. Engagement bearing sleeve 5. Clutch engagement fork |
Dual Clutch Assembly Repair procedures
Removal
1.
Remove the dual clutch transmission from the vehicle.
(Refer to Dual Clutch System - "Repair procedures")
2.
Remove the retaining (A) and then removing the spline hub (B).
3.
...
Clutch Engagement Fork and Engagement Bearing Repair procedures
Removal
1.
Remove the dual clutch transmission from the vehicle.
(Refer to DCT System - "DCT)
2.
Remove the dual clutch assembly.
(Refer to Dual Clutch System - "Dual Clutch Assembly")
3 ...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Auto Light Sensor Repair procedures
Inspection
Check if the auto light control operates like a timing chart
shown below. Tail lamp output and head lamp (Low) output is controlled
based on the auto light sensor's input (illumination intensity) when the
Auto Light Switch in Multi-Function Switch is turned ON, and the
vehicle ...
Hyundai Sonata LF 2014-2019 Service Manual: Blind Spot Detection Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper.
(Refer to Body - "Rear Bumper")
3.
Remove the BSD unit (A) after loosening the mounting nuts.
Take care not to separate the bracket from rear bumper when removing the BSD sensor.
...
