Hyundai Sonata: General Information / Specifications
| Specifications |
| Item | Specification | |
| Suspension type | Mac Pherson Strut | |
| Shock absorber | Type | Gas |
| HPD (High Performance Damper) | ||
| Item | Specification | |
| Suspension type | Multi link | |
| Shock absorber | Type | Gas |
| HPD (High Performance Damper) | ||
| Item | Specification | |
| Wheel | alumium | 6.5J * 16 |
| 7.0J * 17 | ||
| 7.5J * 18 | ||
| Tire | 205/65R16 | |
| 215/55R17 | ||
| 235/45R18 | ||
| Tire pressure | 205/65R16 | 2.4kg/cm?(34psi) |
| 215/55R17 | 2.4kg/cm?(34psi) | |
| 235/45R18 | 2.4kg/cm?(34psi) | |
| Item | Specification | ||
| Front | Rear | ||
| Toe-in | Total | 0.0°±0.2° | 0.17°±0.2° |
| Individual | 0.0°±0.1° | 0.085°±0.1° | |
| Camber angle | -0.5°±0.5° | -1.0°±0.5° | |
| Caster angle | 4.68°±0.5° | - | |
| King-pin angle | 13.9°±0.5° | - | |
| Ride height | 392±10mm | 387±10mm | |
| Item | Tightening torque | ||
| Nm | kgf.m | lb-ft | |
| Hub nut | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Stabilizer link to strut assembly | 98.1 ~ 117.7 | 10.0 ~12.0 | 72.3 ~ 86.8 |
| Stabilizer bar to stabilizer link | 98.1 ~ 117.7 | 10.0 ~12.0 | 72.3 ~ 86.8 |
| Stabilizer mounting bolts | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 |
| Lower arm to knuckle | 98.1 ~ 117.7 | 10.0 ~12.0 | 72.3 ~ 86.8 |
| Lower arm to sub frame (Front) | 117.7 ~ 137.3 | 12.0 ~ 14.0 | 86.8 ~ 101.3 |
| Lower arm to sub frame (Rear) | 156.9 ~ 176.5 | 16.0 ~ 18.0 | 115.7 ~ 130.2 |
| Strut assembly to knuckle | 196.1 ~ 215.7 | 20.0 ~ 22.0 | 144.7 ~ 159.1 |
| Strut assembly lock nut | 53.9 ~ 73.5 | 5.5 ~ 7.5 | 39.8 ~ 54.2 |
| Tie rod end castle nut | 34.3 ~ 44.1 | 3.5 ~ 4.5 | 25.3 ~ 32.5 |
| Steering gear box mounting bolts | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Sub frame stay mounting bolt | 44.1 ~ 58.8 | 4.5 ~ 6.0 | 32.5 ~ 43.4 |
| Sub frame mounting bolt & nut | 156.9 ~ 176.5 | 16.0 ~ 18.0 | 115.7 ~ 130.2 |
| Item | Tightening torque | ||
| Nm | kgf.m | lb-ft | |
| Hub nut | 88.3 ~ 107.9 | 9.0 ~ 11.0 | 65.1 ~ 79.6 |
| Trailing arm to frame | 98.1 ~ 117.7 | 10.0 ~12.0 | 72.3 ~ 86.8 |
| Trailing arm to carrier | 98.1 ~ 117.7 | 10.0 ~12.0 | 72.3 ~ 86.8 |
| Assist arm to sub frame | 107.9 ~ 117.7 | 11.0 ~ 12.0 | 79.6 ~ 86.8 |
| Assist arm to carrier | 137.3 ~ 156.9 | 14.0 ~ 16.0 | 101.3 ~ 115.7 |
| Lower arm to sub frame | 107.9 ~ 117.7 | 11.0 ~ 12.0 | 79.6 ~ 86.8 |
| Lower arm to carrier | 137.3 ~ 156.9 | 14.0 ~ 16.0 | 101.3 ~ 115.7 |
| Upper arm to sub frame | 137.3 ~ 156.9 | 14.0 ~ 16.0 | 101.3 ~ 115.7 |
| Upper arm to carrier | 137.3 ~ 156.9 | 14.0 ~ 16.0 | 101.3 ~ 115.7 |
| Shock absorber to frame | 49.0 ~ 63.7 | 5.0 ~ 6.5 | 36.2 ~ 47.0 |
| Shock absorber to lower arm | 137.3 ~ 156.9 | 14.0 ~ 16.0 | 101.3 ~ 115.7 |
| Stabilizer bar to stabilizer link | 78.5 ~ 98.1 | 8.0 ~ 10.0 | 57.9~72.3 |
| Stabilizer bar to sub frame | 44.1 ~ 53.9 | 4.5 ~ 5.5 | 32.5 ~ 39.8 |
| Stabilizer bar to carrier | 78.5 ~ 98.1 | 8.0 ~ 10.0 | 57.9~72.3 |
| Sub frame mounting bolts | 156.9 ~ 176.5 | 16.0 ~ 18.0 | 115.7 ~ 130.2 |
Special Service Tools
Special Service Tools
Tool (Number and Name)IllustrationUse09546-26000Strut spring compressorCompression of coil spring
...
Other information:
Hyundai Sonata LF 2014-2019 Service Manual: Gear Actuator Assembly Repair procedures
Removal
•
When gear actuator removing, set control shaft lever to neutral position.
1.
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechnical System - "Air cleaner")
2.
Remove the battery and tray.
(Refer to Engine Electrical System - "Batt ...
Hyundai Sonata LF 2014-2019 Service Manual: Blind Spot Detection Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
3.
Rmove the blind spot detection (BSD) switch (A) after disengaging the mounting clip.
Installation
1.
Install the crash pad side switch assembly after conne ...
